CS SR50A, Инструкция по эксплуатации

Страница: 72 / 84

Appendix E.
Tera Term
QuickStart
E-4
6. Select Serial port from the drop-down list in Setup . Change the port to
reflect what you will be using to work with the SR50A/T. Leave the other
settings at their default values. Click the
OK
button when finished
(FIGURE E-6 ).
FIGURE E-6. Configuring the Serial Port
7. All changes needed to work with the SR50A/T are complete. You are back
at the main screen with the cursor blinking in the upper left corner of the
window. To see if communication has been established with the SR40A/T,
type
setup
and press
enter
. The word
setup
should appear in the terminal
window and the SR50A/T setup window should appear as well (FIGURE
E-7 ).
FIGURE E-7. Testing the Configuration