V1.06 EN
3
9. Safety instructions
Observe measuring ranges of the sensors!
Observe the admissible storage and transportation temperature as well as the
permitted operating temperature (e. g. protect the instrument from direct insolation)
Adjustments and calibrations should only be carried out by qualified employees from
the measurement and control technology branch.
We offer you to take back the instruments DS 52, which you would like to dispose of.
The manufacturer cannot be held liable for any damage which occurs as a
result of non-observance or non-compliance with these instructions. Should the
device be tampered with in any matter other than a procedure which is
described and specified in the manual, the warranty is cancelled, and the
manufacturer is exempt from liability.
CS Instruments GmbH offers no guarantee for the suitability for any other
purpose and is not liable for errors which may have slipped into this operation
manual. CS Instruments GmbH is also not liable for consequential damage
resulting from the delivery, capability or use of this device.
Initiation (electrical connection)
When operating electrical instruments it is unavoidable that certain components
are energised dangerously. Work at electrical installations or equipment is only
allowed to be carried out by electrical technicians or instructed staff under the
guidance and suvervision of an electrical technician according to the electrical
regulations.
Warning
Any non-observance of the warning notes may cause grievous bodily harm or
property damages. Qualified staff has to be well familiar with all warnings
according to this instruction manual. The correct and safe operation is subject
to a proper transport, professional installation and accurate initiation. The
following notes on safety are applied in order to stress safety relevant
procedures in this instruction manual - every note is marked by a corresponding
icon.
This symbol means:
Note!
"Note"
marks activities or procedures which have a fundamental influence
on correct operation. Any non-observance may possibly lead to subsequent
damages.
This symbol means:
Warning!
"Warning"
indicates activities or procedures which may lead to a safety
risk for persons and property damages in case of non-observance.