Crystal Vision UP-DOWN-A-VF Скачать руководство пользователя страница 57

Страница: 57 / 70

Crystal Vision

AFD, WSS and VI

8 AFD, WSS and VI

UP-DOWN-VF models ATX and ATXS offer AFD insertion of SMPTE 2016 AFD, WSS or

Video Index for use by downstream equipment.

8.1 Introduction

SMPTE 2016 AFD data can be inserted into the output video for use by downstream

equipment – either manually or by automatically following the incoming AFD data. One of 16

AFD codes is embedded in an ANC data packet, which is carried in the vertical blanking.

Widescreen signalling information can be inserted in 625 line SD outputs for use by

downstream equipment. WSS can be inserted manually or be set to automatically follow the

incoming AFD value and the conversion used. If WSS data is present on the input video this

can either be passed to the output unchanged or substituted for a user selectable code. WSS

data can also be set to be blanked. Video index can be inserted into the output video for use

by downstream equipment. The Video index AFD value can be selected manually or

automatically based on the incoming AFD value and the conversion used. Video index data

can be set to be blanked or pass the input data to the output unchanged

8.2 AFD

There are three sets of controls associated with Active Format Descriptor (AFD). These are:

the inserter mode control, entire image aspect ratio selector (coded frame) and the group of

16 AFD codes. These controls are repeated for both SD and HD.

The HD output will have the ANC data packets containing the AFD information inserted within

the active line portion on the appropriate line.

The 16 available codes defined in SMPTE 2016 are described in the following table:

AFD

code

Description

AFD

code

Description

Undefined

Full Frame (as coded frame)

Reserved

4:3 Centre

16:9 Centre

14:9 Centre

16:9+

Reserved

4:3 with shoot and protect 14:9

centre

Reserved

16:9 with shoot and protect 14:9

centre

Reserved

16:9 with shoot and protect 4:3

centre

Note

: When inserting SMPTE 2016 data the inserter will blank any incoming SMPTE 2016

data.

UP-DOWN-VF User Manual R1.1

23 June 2017

Содержание UP-DOWN-A-VF







































































Результаты поиска

Содержание UP-DOWN-A-VF

Отзывы:

Похожие инструкции для UP-DOWN-A-VF

Бренды по названию

Популярные бренды

Crystal Vision UP-DOWN-A-VF, Руководство пользователя

Результаты поиска

Содержание UP-DOWN-A-VF

Отзывы:

Похожие инструкции для UP-DOWN-A-VF

Бренды по названию

Популярные бренды