Crystal Vision
Installation
2 Installation
2.1 General Safety Summary
The following warnings are intended for user guidance and safety.
Ground
This product must be grounded through the grounding
conductor of the power cord.
Power cable
Use only a power cord that meets the required specification for
this product.
Fuses
To avoid fire hazard use only fuses of the type and rating
specified.
Service
These servicing instructions are for use by qualified personnel
only. To reduce risk of electric shock, do not perform any
servicing other than that contained in this manual unless you
are qualified to do so. Refer all servicing to qualified service
personnel.
Apart from procedures described in this manual there are no
user serviceable parts within the frame. If the frame requires
any other servicing it should be returned to the manufacturer or
dealer.
On no account should the unit be powered whilst any covers
are removed.
Ventilation
The unit must have adequate ventilation. The left and right
ventilation grilles must not be obstructed. If installed in a
standard 19" rack, cool air circulation should be available.
EMC
To comply with EMC regulations, the following guide lines
should be observed:
Do not operate this unit for extended periods with the front
panel open.
Do not operate the equipment with covers or panels removed.
General
To avoid electric shock do not operate this product in wet or
damp conditions.
To avoid injury or fire hazard do not operate this product in an
explosive atmosphere.
Only use this rack in conjunction with Crystal Vision modules
designed for that purpose.
The
Wallbox Q-Down
houses the Crystal Vision range
of optical modules. Although these modules are not
capable of causing personal injury, care should be
exercised when exposing unshielded optical signals not
to look directly into the light beam.
Wallbox Q-Down User Manual R1.0
7
08 August 2016