Crystal Vision
Control Descriptions
Audio Settings Menu
Audio Router
Select audio embedding options for video output. (SYN-A 3G only)
Routing
Select which embedded audio inputs are to be re-
embedded at the output. Current selections are
shown as green circles, pre-selected selections (red
circles) are the crosspoints to be routed when the
‘Take’ button is pressed. The inputs shown along
the top of the matrix are, or will be, routed to the
embedded output channels shown on the left hand
side (use the scroll bar at the bottom of the matrix
to view all 16 inputs). Clicking on the intersection of
the input and output will show a red circle which
will change to green when the ‘Take’ control is
selected. All crosspoints can be pre-selected. The
screen grab above shows de-embedded inputs
Group 1 C3,4 and Group 2-4 C1-4 pre-selected to
embedded channels Group 1-3 C1-4 and Group 4
C1,2. Embedded inputs can be routed to several
outputs if required.
Take
Switch all pre-selected crosspoints in one go.
SYN 3G/SYN-A 3G User Manual R1.3
34
9 July 2019
