Flip HD User Manual R1.1
Crystal Vision
Flip HD User Manual R1.1
4
16/04/2007
2 Hardware installation
The Flip HD single height module uses the RM34 rear connector that will fit into all
Crystal Vision rack frames. All modules can be plugged in and removed while the frame
is powered without damage.
2.1 Rear modules and signal I/O
The 4U Indigo 4 frame will house up to 24 single height modules with up to three power
supplies. The 2U Indigo 2 frame will house up to 12 single height modules and dual
power supplies. The 1U Indigo 1 frame will house six single height modules and a single
power supply. The Indigo DT desktop boxes have a built-in power supply and will house
up to two single height modules.
Note:
For details of fitting rear connectors please refer to the appropriate frame manual.
Rear module connections with RM34
The RM34 being a single height module will allow maximum packing density with the
maximum number of outputs available.
RM34 rear module connector
Description
RM34
•
24 Flip HD modules per
Indigo 4 frame
•
12 per Indigo 2
•
Six per Indigo 1 frame
•
2 per Indigo DT
•
All frame slots can be
used
BNC
I/O assignment
HD/SD OUT
Processed Serial Digital Output
HD/SD OUT
Processed Serial Digital Output
HD/SD IN LOOP OUT
High Definition / Standard Definition Serial Digital Input reclocked loop-through
HD/SD IN LOOP OUT
High Definition / Standard Definition Serial Digital Input reclocked loop-through
NC
No user connection
HD/SD INPUT
High Definition / Standard Definition Serial Digital Input