Crystal Vision CVT9604E-3010W, Руководство пользователя, Страница: 6 / 21

Page 6
Getting Started
1. Powering up the NVR
1. Power up the NVR using
the provided 3 Amp power
adapter within the package
and plug it into the DV12V
port on back of the device
2. Connect the USB mouse
next to the power port on
the back of the device.
3. Connect the Cat5e (LAN)
cable to the NVR and plug
the other end to the
internet router or modem
for internet connection.
(This step is require for remote viewing)
2. NVR Setup Wizard
2. You may scan the QR
code using a QR code
reader to download the
application or skip to the
next step, and download
the application after you
are finish with the setup.
1. Once you have connected
the power adapter wait for
the system to start up.
When you see the log in
screen use the mouse to
click ok to log in. Once you
have log in setup wizard
will show up.
Default ID/Password
Username:
admin
Password: (blank)
3. Next you will asked to
setup a internet
connection. If you have
already connected the
cat5e cable network status
will be shown as “
Healthy ”.
If you have not connected
the cat5e cable you may
do so now, and click “auto
config” to refresh the
status.
(This step is require for remote viewing)