To switch on the device, connect
the earphone / microphone to
the receiver / transmitter
Holding button
bring the transmitter
to the receiver
When Synchronization
is successful, the backlight
turns on
There is signal
The connection was lost
To switch off the device,
remove earphone /
microphone
If there no signal from the transmitter for more
than 3 minutes, the receiver will be automatically
switched off
To switch on
Hold the button
for 1-2 seconds until red
LED is turned off
To switch off
Hold the button
for 1-2 seconds until red
LED is lit up
To switch on
Hold on buttons
at the same moment
for 3-5 sec until the green
LED is lit up
The transmitter is able to work without
connecting an external microphone
MICROPHONE
MUTE
SYNCHRONIZATION
Performed when the earphones / microphone are disconnected
THE SIGNAL
LEVEL
TO SWITCH ON /
SWITCH OFF
BATTERY
CHARGE
BUILT-IN
MICROPHONE
Connect the charge to the
device. When the device is
fully charged the green LED
will be lit up
To charge several devices
at the same time, use
special equipment
To be fully charged from 0 to 100% it will take 2.5 hours.
The operating time of the transmitter is 60 hours, the
receiver 100 hours
!
✔
To switch off
Hold on buttons
at the same moment
for 3-5 sec until the green
LED is turned off
