UM-CV-R
MD
-X17-Q312V1 www.austin-hughes.com
P.6
< 2.2 > On-screen Display Operation ( OSD )
Exit the OSD screen
Go back to the previous on-screen sub-menu or
main menu
Scroll through menu options and adjust
the displayed control
Display the OSD menu
Act as an Enter key to select screen setting options
Turn the monitor on or off
Membrane Switch
Function
All LED touch buttons in
WHITE
light
Picture
Picture mode :
Standard / Vivid / Soft / User mode to choose
Brightness :
Adjust background black level of the screen image
Contrast :
Adjust the difference between the image background
(black level) and the foreground (white level)
Hue:
Adjust the screen hue value
Saturation :
Adjust the saturation of the image color
Picture size :
Adjust the image size
Color temp :
Standard / Cool / Warm / User to choose
Noise reduce :
Reduce the noise of the image
Sharpness :
Adjust the image from weak to sharp
1
When the monitor is connected to power and fi rst turn on, all LED touch buttons will
light on in 6 - 8 seconds. The time is necessarily required for the monitor to load the
software for its opeation. During this time period, no picture is displayed on the screen,
the monitor will not respond to all touch buttons or remote control.
When the monitor is turned off, locate the touch buttons in low ambient light conditions
by pressing any touch buttons ( except the
Power
) to light up all LED touch buttons
for 2 seconds.
All the LED touch buttons will automatically turn off after 30 seconds of idle status
( except the
Power
).
The LED of
Power
touch button will fl ash continuously when there is no signal input.
1
2
3
4
