background image

6

7

www.crystal-acoustics.com

2.1 Placing Plasma Tower Speakers Front Left and Right 

Try to follow these setup suggestions as illustrated in figure 1. Use our online Room Acoustics
Designer

®

to find other placement suggestions. 

1. 

Place your Plasma Speakers equidistantly from your TV/Projector's screen

2.

Measure the distance between your left and right speakers

3.

Measure the distance between the listening position and the midpoint between your left

and right speakers

4.

The difference in length between them should be no greater than 15%

5.

Angle your speakers inwards towards the listening position and find the optimum angle

for best sound

6.

Adjust your speakers so that the tweeters are about ear-height at the listening position

if possible

7.

Move the speakers towards room boundaries (walls or corners) to reinforce low frequen-

cies. Do the opposite to reduce lower frequencies. 

8.

Do not place the speakers too far apart or a hole develops in the center image

9.

Do not place the speakers too close together or the soundstage collapses into a fuzzy

mono center-only image.

2.2 Placing Plasma Center or Plasma CSF-4 Channel Speaker

z

TV screen:

Place your Plasma Center Speaker directly above or below the screen depend-

ing on which is closer to ear level

z

Projector screen:

Place your Plasma center behind or in front of the center of the screen

whether it is acoustically transparent or not

2.3 Placing Plasma Speakers Surround Left and Right 

Two more Front Tower Speakers are supplied for the surround channels and they are opti-

mized to support that attractive, engaging, powerful and enveloping soundfield created by your
Plasma Speaker System.

1. Place the speakers slightly behind the primary listening position
2. Adjust the speakers to fire towards each other behind the seating area

2.4 Placing Plasma CSF-4 speakers On-Wall and In-Wall 

Because of their smart design, the Plasma CSF-4 can be used as an on-wall center channel

(horizontal placement) or surround speaker (vertical placement). The Plasma CSF-4 can also   be
mounted in-wall.

Figure 2: On-wall placement of SmArt-4 in vertical or horizontal position 

VERTICAL

Placement on wall

(Surround)

HORIZONTAL

Placement on wall

(Center)

Содержание PL SYSTEM? PL4-SYSTEM








Отзывы: