Cryptophone GSMK CryptoPhone PSTN/1i Скачать руководство пользователя страница 7

PSTN/1i QSG V0.1E                                                                                                    Page                                                                        

G.  Calling from mobile GSM CryptoPhones to the CryptoPhone PSTN/1 

 

 
In order to place a secure call 

from a mobile GSM CryptoPhone to a CryptoPhone 

PSTN/1

,  you  must  switch  the  “CSD  Line  Type”  on  your  mobile  GSM  CryptoPhone 

from  "V.110,  non-transparent"  to  "V.32,  non-transparent"  (if  it  is  not  already  set  to 
V.32). For instance: 
 

 

As  a  CryptoPhone  G10i  user,

  within  the  CryptoPhone  application,  press 

“Menu” 

 “Settings” and in the menu that will appear select "Call to: Analog 

(V.32)  "  instead  of  "GSM/ISDN  (v.110)".  V.32  may  or  may  not  be  your 
default CSD Line Type depending on your local network environment. 

 

As a CryptoPhone 200,220 or CryptoPhone 300 user

, go to Start 

 Settings 

 Connections 

 CSD Line Type to do the same. 

 

Please always refer to the manual that came with your mobile GSM CryptoPhone for 
details.  On  most  GSM  networks,  GSM  to  GSM  secure  calls  can  be  made  in  either 
V.110  or  V.32  mode,  however  call  setup  in V.32  mode  will  take  significantly  longer 
due to the way the call setup is handled in this mode. 
 

Note that during a mobile to fixed-line connection from the CryptoPhone PSTN/1 to a 
mobile  GSM  CryptoPhone,  it  is  not  possible  to  switch  from  clear  mode  to  secure 
mode or vice versa while in a call. This is due to the way the GSM network handles 
outgoing voice and data calls. 

 
 

H.  Switching the CryptoPhone PSTN/1 off 

 

 
The CryptoPhone PSTN/1 needs to be turned on all the time in order to be able to 
accept incoming calls. It is designed to run for months and years without interruption. 
In case that you need to, e.g., transport the unit to a different place, please press the 
Power button on the front of the PSTN/1 encryption unit for five seconds. The blue 
light will turn off. You can then disconnect all power and telephone lines attached to 
the unit in reverse order as when you did when turning the unit on. 
 
 
I.  

Telephone Features 

 

 
To  use  the  advanced  features  of  the  telephone  that  came  with  your  CryptoPhone 
PSTN/1  system,  please  refer  to  the  separate  telephone  operating  instructions  that 
also came with your CryptoPhone PSTN/1 system.

 

Отзывы: