NovaPad 70 D1216 IPS DC User Manual
19
•
After a few seconds, Wi-Fi will be enabled and a list of
available wireless network names (SSID) will appear.
Locate your wireless network on the list and touch to
select it.
•
You will be asked for the password. Type it in using the
keyboard which automatically appears on screen.
•
Touch the
Connect
option to complete the setup of your
wireless connection.
An icon will be displayed in the status bar to show the wireless
connection status:
Once you are connected to a wireless network, you can select it
on the list, to view the connection details (e.g. signal strength,
link speed and IP address). You can use the
Forget
option to
disconnect from the network and remove the stored password.
Connect to a 3G Network
The NovaPad Tablet supports a variety of 3G dongles from
various manufacturers. To view the list of supported 3G dongles
check the specification at the end of this user manual. For
supported 3G dongles, please do the following:
•
Connect the 3G dongle to the USB port on the Tablet. It
will automatically dial its Internet connection.
•
If your 3G dongle has a full-size USB connection, you will
need to use the supplied USB On-The-Go (OTG) cable to
adapt it for use with the Tablet. Plug your 3G dongle into
the large socket on the OTG cable, and then plug the OTG
cable into the USB port on the Tablet.
