SWC Button
SHORT PRESS
LONG PRESS
KENWOOD
VOL +
VOL -
Arrow Up
▲
Arrow Down
▼
SRCE
►
I
Voice
NOTE:
Step Increment
Step Decrement
Seek Up
Seek Down
Source
Preset
Pick Up Call / Call History On/Off
To Deactivate VR = Say “CANCEL”
Continuous VOL +
Continuous VOL -
None
End Call / Deactivate VR
None
ATT On/Off
Activate VR
BOSS Radio SWC Programming
SWC Radio Wiring connection
SWC Key1 (Brown-wire) connect to Female 3.5 mm Jack - Brown wire
SWC Key2 (White-wire) connect to Female 3.5 mm Jack - Brown/White wire
SWC GND (Black-Wire) connect to Radio Negative wire (Black)
Programming the Radio
Press: [SETTING] > [STEER] > [RESET] > [High Z]
Press the Steering Wheel Control (SWC) buttons set the values as listed below:
Vol
–
[ 4.07]
Vol + [ 3.66]
Seek
–
[ 3.37]
Seek + [ 2.98]
Mode [1.39]
OFF Hook [ 0.00]
The Value in the bracket [X.XX] will vary and will be used as parameter for each assigned function.
Press: [Assign] > [4.07] > [Vol-], then the [4.07] will be replaced with [ Vol-]
With [Assign] highlighted:
Press: [3.66] > [Vol+], then the [3.66] will be replaced with [Vol+]
Press: [3.37] > [Seek-], then the [3.37] will be replaced with [Seek-]
Press: [2.98] > [Seek+], then the [2.98] will be replaced with [Seek+]
Press: [1.39] > [Mode], then the [1.39] will be replaced with [Mode]
Press: [0.00] > [Call], then the [0.00] will be replaced with [Call]
Press: [Enter] for Save the setting and Exit
5 / 5
Rev.041917
