CHRYSLER:
DODGE:
2011 -2014 Charger
2011 -2016 Journey
IMPORTAN T:
Compatible Radio Type:
U-CONNECT 8.4” SCREEN
RVCCH-75E
REAR-VIEW & VIM INTEGRATION FOR CHRYSLER & DODGE VEHICLES with 2-PIECE RA
DIO
U-CONNECT 8.4” SCREEN
(2-PIECE RADIO)
Step 4
. Clean and clear the hole for the camera to be inserted.
Step 5
. Insert the cables and camera through the drilled hole but DO NOT
FULLY INSERT, this will allow you to rotate the camera and position it when
testing the camera view from the display in the car.
Step 6
. Route your power and RCA cable towards the front of the vehicle
Step 1
. After you have removed the 3rd brake light from the trunk lid, use
the supplied drilling template to begin drilling the hole on the back side of the
brake light.
Step 2
. Continue drilling through the back and into the front side of that
brake light. This will allow you a guide hole when you begin drilling on the
front side.
Step 3
. Turn over the brake light and continue clearing the hole on the
front side of the brake light. Be very careful when drilling, take your time and
cleanly drill.
HOW TO DRILL THE HOLE:
USING THE NON-CAMERA THIRD BRAKE LIGHT
INTERFACING SOLUTIONS
2011 -2015
rev080215
300 (See Note Below)
On 2015 Chrysler 300 without a separate
CD slot (one piece radio), use Part#
RVCCH-75C. (see radio picture on page 2)
NOTE:
