Unplug OEM LVDS cable from the OEM monitor (which is connected to the Command box) and plug
it into the
LVDS INPUT
of the LVDS Controller box.
Connect the LVDS cable supplied in the kit to the
LVDS OUT
of the RVCMT-69 and to the
LVDS IN
of
the LVDS Controller box.
Connect the LCD cable supplied in the kit to the
LVDS OUT
of the LVDS controller box an into the
OEM monitor.
Connecting the CAN Wires
1. Tap CAN HIGH (Brown/Green) from the Power harness to the CAN HIGH (Black/Pink) wire on the Command.
2. Tap CAN LOW(Green) from the Power harness to the CAN LOW (White/Pink) wire on the Command.
1
2
3
2 / 6
Rev.120116