Crux RVCAD-81M, Руководство по интеграции

Страница: 3 / 8

INTERFACING SOLUTIONS
RVCAD-81M
REAR-VIEW CAMERA INTEGRATION
FOR SELECT AUDI with MMI 3G + 4G
VEHICLES 2012-2014
www.cruxinterfacing.com Rev. 070615 3
CONNECTING THE INTERFACE
Follow these steps to properly install the interface module.
Step 1
- Remove the display to gain access to the factory LVDS connectors located behind the display.
You will also need to locate the factory GATEWAY module.
Step 2
- Connect the 6-Pin Power harness to the interface module and connect the wires using the wiring color code below.
6-PIN HARNESS WIRES
WHITE = SWITCH SIGNAL*
RED = ACC +12V
YELLOW = CO12V
BLACK = GROUND
GRAY = MMI SIGNAL**
GREEN = R12V
Notes: *Switch signal re12V
**MMI Signal is the communication with the interface on sharing control signal to DVD.
USE THE 6-PIN HARNESS WIRES TO POWER YOUR CAMERA:
GREEN = +12V
BLACK = GROUND