IMAGE
PARK
UT IL1
UT IL2
INFO
H- POSITION
V- POSITION
H- SIZE(NAVI)
Menu of FACT ORY
MENU to Return SEL to Select/Save
IMAGE
PARK
UT IL1
UT IL2
INFO
PAS T YPE
PAS SET UP
REAR T YPE
SAFE ENABLE
Menu of FACT ORY
MENU to Return SEL to Select/Save
Adjusting Screen position and size
H-POSITION : Move the image horizontally
V-POSITION : Move the image vertically
H-SIZE(NAVI) : Adjust the size of navigation
image horizontally
Setting the Rear View Camera
PAS TYPE : Parking guideline setting
- NOT USED: No use parking guideline
- PAS ON: Selecting Dynamic parking guide line
- PAS OFF: Selecting fixed parking guide line
PAS SETUP : Adjusting the position of the parking guide line
<H-POSITION>
<V-POSITION>
REAR TYPE: Choose rear camera recognition.
- CAN: Reverse Camera is triggered by CAN when shifting into reverse.
CAN wire of module must be connected to CAN wire of car.
- LAMP: Reverse Camera is triggered when the reverse light turns on.
Connect “Rear-C” cable of the power cable the reverse light.
SAFE ENABLE : ON = VIM feature is turned OFF.
OFF = VIM feature is turned ON.
Multimedia Integration Interface for
FORD Vehicles with Sync 3 Systems
MRVFD-79Q
Crux Interfacing Solutions
www.cruxinterfacing.com
tel. #: (818) 609-9299
fax #: (818) 996-8188
6 / 8
rev.012317
