
9
4. Insert the blending stick into the food before switching on the power
this is to avoid splashing.
5. Select the desired speed on the control dial and press the on button.
Select a low speed for slower blending and to minimize splashing and a higher speed or
turbo for faster blending.
6. Move the hand blender using a mashing or stirring action to blend and mix the food, do
not lift the hand blender out of the food before switching off.
NOTE:
Do not use the hand blender to process extremely hard foods, such as unshelled
nuts, ice cubes, coffee beans, grains, or hard spices e.g. nutmeg. Processing these foods
could damage the blades.
7. After use, release the on or turbo button. Turn the blending stick clockwise to unlock.
USING THE MASHER
This can be used with cooked vegetables such as potatoes, carrot and swede. Do not mash
hard or raw vegetables as this will damage the mashing head.
MASHING IN A SAUCEPAN
Do not use the mashing head in a saucepan over direct heat, remove from
the heat first and allow to cool slightly.
Don’t overfill the pan, for best results do not fill more than half full with food.
Do not tap the mashing head on the side of the pan, use a spatula to remove
any mashed food from the head.
1. Cook your chosen vegetables and drain excess water. Place a lid on
the cooked food and leave for 5 minutes, the residual steam will keep
the food hot.
2. Attach the mashing head to the motor unit and turn anti-clockwise to lock
the attachment into place.
3. Select a low speed on the variable speed control dial.
4. Remove the lid from the vegetables and insert the mashing head into
the pan or bowl, pressing the on button, use up and down movements to
mash the food until the desired result is achieved.
5. When finished, release the on button and scrape any mashed food from
the mashing head with a spatula. Turn the mashing head clockwise to
remove the mashing head.
Fig. 2
SZ-314283_CRUX003_Hand blender_MPL_IM_r2.indd 9
2017-06-09 2:12 PM