Version 02.12.2010
BEEMB-41
p
age
5
2.2.
Connections
Unplug the Quadlock socket from the rear of the
navigation computer.
Unplug the connector with the fiber optics from the
Quadlock socket.
Exchange the shells of the vehicle harness’ fiber optical connector
and interface harness’ fiber optical connector with each other.
Information
On devices with external audio gateway, e.g. NTG1, the fiber optical connector can be found as separate
connector on the device’s back.
Connect the vehicle harness’ fiber optical
connector to the female fiber optical socket
of the interface harness.
Connect the interface harness’ fiber optical
connector to the Quadlock socket of the
vehicle harness.
Plug the Quadlock socket back into the
navigation computer.
Connect red and black wire to
per12V source.
Connect blue to +12V to enable
CD-changer emulation for A2DP.
A2DP requirement is that the factory
CD-changer is NOT installed.
Install the microphone close to the driver.
Connect the microphone's 2-Pin AMP jack to the 2-Pin AMP jack bush of the CRUX harness.
Wire color
Definition
● Black
Ground
●
Red
+12V DC (permanent)
●
Blue
to +12V = CDC-emu on
External Audio-Gateway
Internal Audio-Gateway
