Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, C
A
91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.052820
4 of 9
ACPAD-01
Smart-Play Smartphone Connectivity Interface for
Audi Vehicles with Concert / Symphony Non MMI Radios
R
INTERFACING SOLUTIONS
10. Unplug the 10 pin LVDS connector. 11. On a clean, flat surface, remove
the 4 screws holding the screens metal
frame.
12. Using a flat head screw driver,
carefully pry the locks to release the
metal frame.
13. Gently peel off the touch panel’s
protective film on both sides.
14. Lay the touch panel on top of the
OEM screen.
15. Reinstall the metal frame as shown
above being carefull not to damage the
flexible circuit.
16. Reinstall the 4 screws holding the
metal frame. Touch panel installation is
now complete
17. Connect the touch screen’s flexible
circuit to the touch panel PCB/cable
provided.
18. Plug the 10-pin LVDS connector on
the LVDS cable provided to the OEM
screen.
19. Plug the OEM LVDS connector to
the LVDS cable provided in the kit.
20. Plug in the other end of the touch
panel PCB/cable to the Smart-Play
module port next to the HDMI port.
21. Install the front and rear cameras
(if applicable) and power using the
power wires provided.
