Crux 14545, Инструкция по эксплуатации

Страница: 9 / 16

7
Before Using for the First Time
There may be manufacturing residue or oil remaining in the toaster or heating element, which
might emit an odor at the time of the first use. This is normal and will not occur after several
uses. It is suggested to operate the CRUX 4 Slice Toaster without bread for first use according
to the below steps. Then let the toaster cool down before you start toasting the first slice.
How to Use the CRUX 4 Slice Toaster
1. Ensure the CRUX 4 Slice Toaster is connected to the main power supply.
2. Place one to two slices of bread into the toasting slots and press the loading lever down
until it latches. The CRUX 4 Slice Toaster will heat up automatically and start toasting.
NOTE: the CRUX 4 Slice Toaster must be connected to the main power supply in order
for the bread carriage to engage and for the toasting cycle to begin
3. Adjust the browning control to brown the toast to your desired taste.
4. To stop toasting press the CANCEL button at any time.
5. The loading lever will rise automatically when toasting is finished. This CRUX 4 Slice
Toaster is equipped with a high lift lever to help with the removal of smaller items.
6. If the toast is not dark enough, you can toast the bread again. Adjust the browning
control to your desired setting and replace the toast. Ensure the toast does not burn
while re-toasting.
Browning Control
The browning control enables adjustment of toasting time and has the following settings:
• Reheat – for warming pre-toasted bread
• 1-2 for light toasting
• 3-4 for medium toasting
• 5-6 for dark toasting