Installation Kit
120 91-3037P
Spacers
(supplied with
your order)
1.
Press posts on
trimplate
into holes on
kit frame
to snap parts
together and secure with
hex screws
(Figure 1).
2.
Push clips on
support tray
into slots on rear of kit frame
to secure (Figure 1).
3.
Cut off tabs on both mounting brackets labeled
“B”
and
“C”
shown as shaded (Figure 2). The
“A”
tabs must remain.
4.
Secure
mounting brackets
to sides of kit assembly with
studs
and
nuts
supplied (Figure 1).
5.
Choose the proper
spacers
(supplied with your order) to
allow receiver nosepiece to extend 1/8” to 1/4” beyond face of
trimplate (Figure 3).
6.
Insert receiver shafts (with spacers in place) through openings
in trimplate. Secure receiver and
faceplate
with
shaftnuts
supplied with receiver.
7.
Attach
control knobs
.
1/8” -1/4”
▲
▲
Spacer
Shaft Receiver Assembly
3
FIGURE 3
Shaftnuts
®
Copyright 2003 Crutchfield Corporation
FIGURE 1
Trimplate
Kit Frame
Support Tray
Left Mounting Bracket
Faceplate
Control Knobs
Tools Required
▲
Deep Socket
(size depends upon receiver)
Stud
Nut
Right Mounting Bracket
1/4” & 3/8”
Sockets
Hex Screws
FIGURE 2
Cut off
“B” & “C” tabs
(shaded)
Chevrolet/GMC
“C”
“B”
“B”
“A” tabs must remain
“A”
“A”
Hacksaw
