3 = Program Change e Control Change. (DEFAULT)
From the MIDI OUT
connector will come out messagges of note ON and OFF, Program change
messagges generated by footswitches PRESET UP & DOWN, messages generated
by F.C.1 & F.C.2 and panel potentiometers “snapshots”.
Internal sound generation will respond to note ON & OFF messages, to F.C.1 &
F.C.2 and to PRESET UP & DOWN footswitches.
Will be possible to change presets and change sound parameters with right panel,
control change messages and program change messages will come out from MIDI
OUT.
IMPORTANT: In the case that you want to connect Bassman to an external
midi keyboard and you want to use Bassman as generic midi pedalboard
using the sounds of the keyboard, is important to check the MIDI ROUTING
CONFIGURATION! “Snapshot” are such a “photo” of panel pots value that
will be sent when you pass from a preset to another.
For example, if midi routine is configured to 2 or 3, passing from one preset
to another, with the sending of “snapshot”, values associated with control
changes may suffer unespecting changes and influence the sound generated
by the keyboard or expander connected to Crumar bassman MIDI OUT: in
this case we suggest to use case 0 or 1.
SYNTH SECTION
Содержание bassman
Страница 1: ...USER MANUAL...
