Section 4
4-10
380 Express Series
Rudder - Inboards, V-Drives
The twin rudders are offset from the shaft centerline to allow shaft
removal without having to remove the rudders. Each rudder is also
canted inboard slightly to allow for constant water pressure on the
rudder face. The pressure on the rudder face prevents “flutter” in a 0°
rudder position. For center-to-center dimensions, contact your
Cruisers Yachts Dealer.
CSR_360_004A
51-1/4" (1.30 m)
CENTER TO CENTER
OF BALL JOINTS
48-13/16" (1.24 m)
CENTER TO CENTER
OF RUDDER POSTS
CAUTION
The carrier seal should be inspected regularly for
excessive water entry. If left unattended, excessive
water entry could result in the submergence of the
engine compartment, or of the entire yacht.
RUDDER
BEARING
AND SEAL
CSR173-59
Downloaded
from
CruisersOwnersForum
http://www.CruisersOwnersForum.com
