70 Series Landcruiser Console Specialists
6. REMOVE FRONT SEATS
There are 4 bolts in each seat with a 14mm Hex Head. The
rear bolts have plastic covers which are easily removed by
hand, then the bolts can be accessed. It is not necessary to
modify the seat rails of the DPF side curtain airbag
single cabs
7. FRIDGE HARNESS
Have the power lead plug ready before the fridge goes into
place on the console.
We recommend connecting it to a dual battery with an
inline fuse to prevent running the starter battery flat. It is
best to run the harness under the carpet and bring it out at
the join in the carpet that is just under the front of the rear
seats.
8. MOUNT FRIDGE TO BASE
Sit the fridge upside down on the foam pad that came with
the packaging. Inside the fridge compartment there will be
a packet with 4 black machine screws. Use the 4 screws to
bolt the fridge base to the bottom of the fridge. Slide the
base forward on the fridge so that the fridge will sit back
further in the vehicle, then tighten the screws.
Page 3
