Rugged, Reliable, Mobile, Secure
TM
1-800-260-9800
www.CRU-DataPort.com
DataPort
™
Figure 4: Unit ID Select Switch Settings
Selecting the Unit ID Number:
Use the alignment tool (provided)
to select the ID number of the disk drive.
NOTE:
The lock on the Data Express serves as a power switch. It must
be engaged (turned counterclockwise) for the Data Express to power
up and function properly.
Product Warranty
CRU-DataPort (CRU) warrants the Data Express DE110 to be free of
significant defects in material and workmanship for a period of five years
from the original date of purchase. CRU’s warranty is nontransferable and is
limited to the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other warranties. CRU ex-
pressly disclaims all other warranties, including but not limited to, the implied
warranties of merchantability and fitness for a particular purpose and non-in-
fringement of third-party rights with respect to the documentation and hardware.
No CRU dealer, agent or employee is authorized to make any modification, exten-
sion, or addition to this warranty. In no event will CRU or its suppliers be liable
for any costs of procurement of substitute products or services, lost profits, loss
of information or data, computer malfunction, or any other special, indirect, con-
sequential, or incidental damages arising in any way out of the sale of, use of,
or inability to use any CRU product or service, even if CRU has been advised of
the possibility of such damages. In no case shall CRU’s liability exceed the actual
money paid for the products at issue. CRU reserves the right to make modifica-
tions and additions to this product without notice or taking on additional liability.
Certification
EMI Standard:
FCC Part 15 Class B, CE
EMC Standard:
EN55022, EN55024
FCC Certification
This device has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received;
including interference that may cause undesired operation.
Register your product at www.CRU-DataPort.com and be
automatically entered to win a free prize!
A7-110-0001 Rev. 1.1
Important Notes Regarding the “Universal” Receiving Frame
Existing PATA DE110 carriers and new SATA DE110 carriers will both
work in SATA “universal” receiving frames. “Universal” receiving
frames are indicated by their BLUE LED. Existing DE110 carriers are
indicated by a Data Express Logo, while the new SATA DE110 carriers
are indicated by the SATA logo.
SATA DE110 carriers will only work in SATA DE110 “universal” receiv-
ing frames (indicated by their BLUE LED). Existing PATA DE110 receiving
frames are indicated by their GREEN LED.
For SATA 1.5Gb/s operation, a SATA controller and appropriate SATA
cable are required.
Unit ID Select Switch Settings
NOTE:
The unit ID number display is for ID display purposes only.
The following table lists the unit ID select switch settings and the valid
AT/IDE unit numbers. Please note that all invalid switch settings have
X’s and result in a blank display in the receiving frame window.
Figure 5: Unit ID Select
Switch Location
Fig
ur
e
3:
D
riv
e
In
st
al
la
tio
n
As
se
m
bl
y
Drive Carrier
Guide
Typical Data Express
Receiving Frame
Unit ID Select
Rotating Switch
Spacer Plate*
(2 total)
Drive Cover (provided)
Serial ATA Drive
(not included)
Drive
Carrier
Universal
Receiving
Frame
Optional Activity Indicator
Cable (included)
*NOTE: Installation
of Spacer Plates is
optional
Drive Carrier
Board
#6-32 Philips
F.H. Screw
(6 total)
