RTX220 QR - Manual
1. Pre-Installation Steps
1.1 Box Contents
Check the accessories with your RAX unit. Please contact CRU if any parts
are missing or damaged. The box should contain the following items:
1.2 Identifying Parts
Take a moment to familiarize yourself with the parts of RAX215DC-XJ.
This will help you to better understand the remaining instructions.
2. Installation Steps
2.1 Installing Hard Drives
a. If the carrier is bundled with the unit,
push in on the handle to pop it out,
and then pull on the handle to remove
the carrier from the frame.
b. Use a Phillips-head screwdriver to remove the screws securing the
drive cover on either side of the carrier, and then remove the cover.
c. Carefully insert the drive (not included) into the carrier. Slide the
drive towards the Drive Carrier Board so that the I/O connector on
the drive mates with the connector on the Drive Carrier Board.
Table of Contents
Accessories
Quantity
RAX unit
1
Power cord
1
Screw kit
1
Quick Start Guide and warranty information
1
1. Pre-Installation Steps
1
1.1 Box Contents
1
1.2 Identifying Parts
1
2. Installation Steps
1
2.1 Installing Hard Drives
1
2.2 Rack Mounting Warnings
2
3. Operating RAX215DC-XJ
2
4. Usage with Mac and Windows Operating Systems
2
4.1 Usage with Macintosh Computers
2
4.1.1 Compatibility
2
4.1.2 Formatting a drive
2
4.1.3 Mounting and Ejecting Volumes
2
4.1.4 Creating a boot drive
3
4.2 Usage with Windows Operating System
3
4.2.1 Compatibility
3
4.2.2 Formatting a drive
3
4.2.3 Mounting and Ejecting Volumes
3
4.2.4 Creating a boot drive
3
5. Frequently Asked Questions
4
6. Technical Specifications
4
Page 1
AC Power Inlet
4cm Exhaust Fan
Multi-Lane SAS/SATA Port
RAX Fan Status LEDs
Bay Fan Error LED
Disable Button
Bay Power
Button
Drive Activity LED
Drive Ready /
Error LED
Power Switch (on/off)
RAX Power
LED
Ejection Handle
Mounting Bracket
