CRT SS 9900, Руководство пользователя

Страница: 10 / 20

33
3
Replacing Fuse
Front Panel
Install Microphone Hanger
Install External Speaker
This radio adopt 10A, 250V fuse.
If the fuse blows, determine the reason, then correct the problem.
After the problem is resolved, replace the fuse. If newly installed
fuses continue to blow, disconnect the power cable and contact your
autho-rized dealer or an authorized servicecenter
Pull the two fuse cover in difference direction and open it. 1.
Replace the broke fuse with good one, and close the fuse holder. 2.
Be sure to use suggested fuse, or it might damage the radio. 3.
Choose a ideal location which will not interfere the driver. Using
supplied self-tapping screws and pads(2 sets) to fix the hanger
If use an e x ternal speaker, please choose 8 ohm speaker with
3.50mm mono band (doulbe cable) plug.
Locate the external speaker in a suitablea place. 1.
Plug into the speaker jack. 2.
GETTING ACQUAINTED
EMG
1 2 3 4
13 5 6 17 7 8
9 11 10 12
16
15
14
No.
Key Functions
1
MEM
Use, store or delete memory channel
2
MODE
Switch mode: FM、AM、USB、LSB、PA
3
BAND Switch band: A-I
4
FRQ
Switch between channel mode and frequency mode
5
MENU
Function Menu key
6
SCAN
Scan; Scan add; Scan delete
7
DW
Dual-watch scan; Dual-watch setup
8
EMG
Emergy Channel; Keypad lock
9
PWR
RF Power Control
10
RFG
RF Gain Control
11
SQ
Squelch Control
12
CLA
SSB Clarifier switch
13
VOL/OFF
Power On/Off; Volume Control
14
CH
Channel Switch, Push key
15
RX/TX Indicator
16
Microphone Jack
17
LCD Display