4. SHORTCUT OPERATION
4.7 Receiving
4.8 Transmitting
Select a receiving channel or frequency for receiving call, if the RX signal is week,
Hold [PTT] and speak into microphone. the radio start transmit, the screen shows red
speak into the microphone at your normal voice level: it will help to transfer best audio signal.
When the RX
current channel receive a matching carrier but unmatching signaling. Refer to
CTCSS/ DCS CODE or Optional Signaling setup in Page 6).
hold front panel key or microphone key to monitor weak signals.
4.9 Squelch Off
In standby, press microphone
key or front panel
key to turn off squelch,
the radio will monitor weak signal.
4.11 Keypad Lockout
In standby, hold key or key , the radio emit Du sound, the LCD displays LOCK.
Now release the key, the keypad is locked. To turn off key lock, hold key or key until
a “Du Du” tone signal is heard, the LOCK icon disappears, now you may release the key.
4.12 Transmit Tone Pulse Frequency
Hold PTT and [DN] key will transmit selected Pre-programmed tone pulse frequency.
4.13 VFO Scan and Channel Scan
1. VFO scan: In VFO mode, press microphone key or key to start VFO scan. If the
radio has program PL1, PH1, ,PL2, PH2, PH2 frequency( in the bottom of channel list), VFO
scan will between PL1-PL2 and PL2-PH2.
2. Channel Scan: In channel mode press microphone key and then press key to start
channel scan. Channel scan setting shall be programmed by PC software.
»
4.10 Emergency Alarm
In standby, hold key, release it until the LCD displays ALARM, the alarm function
turns on. Program emergency alarm rule shall be programmed by PC software.
4.15 VOX On/Off control
In standby, hold key until LCD displays VOX icon, repeater this step or repower on
【V/M】
radio to turn off VOX function.
Note: Before turn on VOX, please set VOX level in 26th menu.
8
