CRT 4CF, Руководство пользователя

Страница: 35 / 47

[Settings: Master side]
Press the [PF1] side key to Power on, the display shows "CLONE", the master
1.
unit enters into copy mode .
Press [PF1] key, the display appears "CLONE XX" XX stands for the data amount
2.
being cloned.
When the data transfer is completed, slave unit restarts, the master unit display
3.
appears "CLONE 04".
Master unit remain copy mode state to prepare for the next copy, if reboot the
4.
master means exit copy mode to return to normal mode.
[Settings: Slave side]
In the standby mode, when the slave receives the data, the display shows "
1.
CLONE XX " XX stands for
the data being cloned.
When data reception is complete, the slave unit returns to normal mode and
2.
restart automatically.
Turn off the slave's power, remove the cable, insert another slave which you want
3.
to copy.
If the data is not successfully transmitted, turn off the master and slave, check if the cable connections are
correct, and then repeat the whole process again.
SENIOR FUNCTION OPERATIONS
31