Installation and Programming Instructions for Electronic Stand-Alone Cylindrical Locks
- 24 -
GLOSSARY
Wake Up Button: Pressing this button activates the number pad. Enter the PIN Code
while the number pad is illuminated, and when not illuminated press the [Wake Up]
button to illuminate the pad, It is also used to quit the Program mode.
Master PIN Code: The Master PIN Code is used for programming User codes and
feature settings. The Master PIN Code will operate the lock. The Master PIN Code is
a factory default setting.
Manager PIN Code: The Manager PIN Code is used for programming Passage Mode,
Lockout Mode and Sound Volume and Auto re-lock time settings. The Manager PIN
Code will operate the lock. User can program in up to 3 different Manager PIN Codes.
User PIN Code: The User PIN code is used for operating the lock.
One-Time User PIN Code: This PIN Code can only be used once and the PIN
information is deleted automatically after use. User can program in up to 3 different
One-Time User PIN Codes.
Passage Mode: Enabling Passage Mode allows continuous entry for non-restricted
traffic. Passage Mode is enabled or disabled through feature programming by either the
Master or Manager PIN Code. When the unit is in Passage Mode, the unlocked
padlock icon will appear on the screen.
Lockout Mode: This feature is enabled by either the Master or Manager PIN Codes.
When enabled, it restricts all User PIN Code access except Master and Manager PIN
Codes. When the unit is in Lockout, the padlock icon will appear on the screen.
Low Battery: When battery power is low, the low battery icon will begin blinking. If
battery power is completely lost, the key and cylinder can be used.
Re-lock Time: After successful code entry and the unit unlocks, it will automatically
re-lock after a default of five (5) seconds. Re-lock time is adjustable from one (1) to
ten (10) seconds through feature settings.
Beep Volume: It sets the volume of sound emitted during the inputting of numbers and
opening or locking the door. (Level 1 ~ Level 4) The sound is muted at Level 4, and
is at the maximum volume at Level 3. The factory default is Level 2.
Shut Down Time: The unit will shut down for a default of sixty (60) seconds and not
allow operation after the wrong code entry limit has been met. Shut down time is
factory default settings. When the unit is in Shut Down, the padlock icon will be
flashing.
Wrong Code Entry Limit: After a default of five (5) unsuccessful attempts at entering a
valid PIN Code the unit will shut down and not allow operation. Wrong code entry limit
is a factory default setting.
- 25 -
- 24 -