Bowmont Light Wood
Vanity Unit
This installation guide applies to the following product:
WS040478 - Bowmont Light Wood Vanity Unit
Tools Required
Cross head screwdriver, Tape Measure, Drill, 6mm Drill Bit, 6mm Ceramic Drill Bit (Optional),
Spirit Level, Silicon sealant (Not Supplied)
KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN
Home Safety Advice
Do not use power screwdrivers to assemble this product.
Do not overload the vanity unit.
Maximum safe working load for the shelf is 10kg evenly distributed.
Do not strike the product with hard or sharp objects.
Product Care
Do not use abrasive or chemical cleaners as these will damage the product.
1
WSH 015 R02
It is recommended that two people fit this product to ensure that it is fitted safely.
Always take care when using power tools, particularly in the bathroom.
Always check for hidden cables and pipework before drilling and take extreme care if there is
any water in the working area.
Always wear suitable eye protection when drilling.
If the product is to be fitted on a ceramic tiled wall, a ceramic drill bit should be used.
Always ensure that the drill hole passes through the central tiled area rather than through the
grouted area. To prevent damage to the tile, mask the area around the hole with tape before
drilling.
Double check the drill bit size matches the wall plug diameter before drilling the wall.
Thank you for purchasing this Croydex product. Please follow the fixing and care instructions to
ensure that your Vanity Unit is fitted safely and that it retains its high quality finish.
Please retain this leaflet for future reference.
