4
Installation Guide
6. Peel the protective cover strip from the double sided tape
on the support brackets.
(The adhesive tape is ideal for use on tiled and laminate
surfaces but may cause damage to painted and papered
walls.)
5. Align the centre of the mirror with the centre line of the
Hang ’N’ Lock bracket and the carefully hang the mirror
on the bracket. Ensure the mirror is fully supported on the
bracket before releasing it.
Check the level of the mirror and its position on the wall.
Carefully ease the bottom of the mirror from the wall to
access the back of the wall spacers. Make sure that the
mirror is fully supported on the bracket at all times when
doing this.
MIR 028 R02
7. Carefully lower the mirror to a vertical position and press
the adhesive pads against the wall.
The mirror can be removed by separating the hook and loop
fastener between the mirror and wall spacers.
8. The wall spacer can be screwed to the wall if the mounting
surface is unsuitable for fixing with adhesive tape.
Mark the centre of the wall spacer on the wall surface.
Remove the mirror from the Hang ‘N’ Lock bracket and
separate the wall spacers from the mirror. Fasten the wall
spacers using the screws provided and re-hang the mirror.
For details of the other items in the Croydex range please visit our website:
www.croydex.com
Croydex Ltd, Central Way, Andover, Hants, SP10 5AW, UK
Tel: +44 (0) 1264 365881
Fax: +44 (0) 1264 356437
Email: [email protected]
