1
Hang ‘N’ Lock Mirrors
Thank you for purchasing this Croydex product. Please follow the fixing and care instructions to
ensure your Hang ‘N’ Lock Mirror is fitted safely and retains its high quality finish.
Please retain this leaflet for future reference.
This installation guide applies to the following mirrors:
MM700100 - Bampton Rectangular Mirror with Shelves
MM700200 - Coniston Oval Mirror with Shelves
MM700300 - Devoke Rectangular Double Layer Mirror with Shelf
MM700400 - Fairfield Arch Mirror with Shelf
MM700500 - Helton Rectangular Mirror with Under Mirror Shelf
MM700600 - Langdale Arch Mirror with Shelf
MM700700 - Meadley Circular Mirror with Mosaic Surround
MM700800 - Rydal Rectangular Double Layer Mirror with Shelf
MM701200 - Belham Oval Mirror
MM701300 - Harrop Rounded Rectangular Mirror
MM701400 - Kentmere Rectangular Mirror
MM701500 - Simpson Round Mirror
Tools required - not supplied
Pencil;Tape Measure; Philips Screwdriver; Flat Head Screwdriver; Drill; 8mm Drill Bit,
8mm Ceramic drill bit (optional).
KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN
Home Safety Advice
- It is recommended that two people fit this product to ensure that it is fitted safely.
- Always take care when using power tools, particularly in the bathroom.
- Always check for hidden cables and pipework before drilling and take extreme care if there is any
water in the working area.
- It is advisable to use a residual current circuit breaker (RCCB).
- Always wear suitable eye protection when drilling.
- If the product is to be fitted on a ceramic tiled wall, a ceramic drill bit should be used.
- Always ensure that the drill hole passes through the central tiled area rather than through the
grouted area. To prevent damage to the tile, mask the area around the hole with tape
before drilling.
- Do not strike the product with hard or sharp objects.
-
Do not overload the glass shelves. Maximum loading for the small shelf is 0.5Kg and 1Kg for the
larger shelves, evenly distributed. The maximum loading for the Helton Mirror shelf MM700500
is 2kg evenly distributed
Product Care
To retain the best quality finish, clean product regularly with a soft damp cloth.
Do not use abrasive or chemical cleaners as these will damage the product.
Do not position glass components directly above a heat source.
MIR 028 R02
