Croydex, Central Way, Andover,
Hampshire, SP10 5AW, UK
+44 (0) 1264 365881
+44 (0) 1264 356437
www.croydex.com
1
2
3
R&R 061 R04
Always take care when using power tools,
particularly if th
ere is an
y water in the
working area.
Do not use a hammer drill when drilling into a
tiled surface.
Always use a drill bit that is suitable for the
surface that is being drilled.
The wall plugs supplied are for use on solid
walls only. For cavity walls or plasterboard use
specialist fixings that are suitable for the type
of wall construction.
4
To retain the best quality finish, clean product
regularly with a soft damp cloth.
Do not use abrasive or chemical cleaners, as
these will damage the product.
Do not use this product as a grab bar.
If the gliders become sticky, use a small
amount of furniture polish to improve
performance.
Do not overload the rail. Suitable for use with
a maximum of two standard shower curtains.
SAFETY AND CARE
x1 (2)
x1
x12 (24)
x1 (2)
x1 (2)
x5 (6)
x5 (6)
x1 (2)
x1 (2)
x1
x1 (2)
x2
Min
150mm
Remove the end brackets from the Bendy Rail.
Form the Bendy Rail to your desired size and shape.
The minimum bend radius is 150mm.
Once you have bent your rail,
DO NOT
make
any attempt to undo the bend as this will
separate the rail components and cause the
hooks to fall out.
After the rail has been bent, cut the rail ends straight
as shown.
Quantities of parts may vary due to product sizes.
Hold the rail in the
desired position
ensuring there
is adequate
curtain overlap
into the bath
or shower tray.
Mark the position of
each wall bracket on the
mounting surface. Use
a spirit level to ensure it
is level.
5
6
At this stage, measure the distance between the top
of the wall bracket and the ceiling.
Using this measurement, cut the ceiling support rod
to length for use later.
?
?
x2
2
x
x3
