background image

Operation Manual

Power-Tech 1.1

Obtaining Other Language Versions:

 To obtain information in another language about the use of this product, please contact your 

local Crown Distributor. If you need assistance locating your local distributor, please contact Crown at 574-294-8000.

This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible 
situation which may arise during installation, operation or maintenance.

The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may have 
occurred. To  obtain the latest version of this manual, please visit the Crown website at www.crownaudio.com.

Trademark Notice:

 Crown, Amcron and ODEP

 

are registered trademarks of Crown International. Grounded Bridge is a trademark of 

Crown International. Other trademarks are the property of their respective owners.

Some models may be exported under the name Amcron.

®

©2002 by Crown Audio, Inc.  P.O. Box 1000, Elkhart, Indiana 46515-1000 U.S.A. Telephone: 574-294-8000

132800-2

2/02

Power-Tech .1 Series

Power-Tech 2.1

Power-Tech 3.1

Содержание Power-Tech 1.1

























Отзывы: