Crown PIP-EDCB, Справочное руководство

Страница: 6 / 12

P.I.P.–EDCb
Page 6
3 Installation
Before installing the
P.I.P. mod-
ule,
it should first be
configured.
3.1 P.I.P. Configuration
1. Set the corner frequency (–3 dB
frequency) for each subsonic
filter with DIP switches S1 and
S2 (see Figure 3.2). Notice that
the first six switch segments
control the corner frequency.
Fig. 3.2 S1/S2 DIP Switch Settings
36 Hz Corner Frequency
32 Hz Corner Frequency
28 Hz Corner Frequency
24 Hz Corner Frequency
Slow Attack / Slow Release
Slow Attack / Fast Release
Fast Attack / Slow Release
Fast Attack / Fast Release
Compressor OFF
Function
ON
ON
OFF
OFF
1
ON
OFF
ON
OFF
2
ON
ON
OFF
OFF
3
ON
OFF
ON
OFF
4
ON
ON
OFF
OFF
5
ON
OFF
ON
OFF
6
OFF
OFF
ON
ON
7
OFF
OFF
OFF
OFF
ON
8
DIP Switch (S1 or S2)
OFF
ON
OFF
ON
9
Subsonic
Filter
Compressor
Slow Attack / Slow Release
Slow Attack / Fast Release
Fast Attack / Slow Release
Fast Attack / Fast Release
Compressor
Setting
5 msec
10 msec
1.25 msec
1.5 msec
Approximate Time
Attack Release
900 msec
220 msec
900 msec
220 msec
Figure 3.2). Notice that the
last three DIP switch seg-
ments control attack and re-
lease times. The actual attack
time depends on the release
time. Figure 3.3 provides ap-
proximate times for each set-
ting.
3. Adjust each channel’s com-
pressor threshold using the
compressor threshold pots
(see Figure 2.1, “C”). Each
Fig. 3.3 Compressor Attack and
Release Times (Approximate)
2. Use DIP switches S1 and S2
to configure each compres-
sor’s
attack and release
times (fast or slow), or turn
each compressor off (see
1 2 3 4 5
ON
6 7 8 9
Fig. 3.1 S1/S2 DIP Switch