background image

   Operation  Manual

Product Registration: 

Register your new product at http://warranty.harmanpro.com.

 

Obtaining Other Language Versions:

 To obtain information in another language about the use of this product, please contact your 

local Crown Distributor. If you need assistance locating your local distributor, please contact Crown at 574-294-8000 or  

www.crownaudio.com.
This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible 

situation which may arise during installation, operation or maintenance.
The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may have 

occurred. To obtain the latest version of this manual, please visit the Crown website at www.crownaudio.com.

Trademark Notice:

 Crown, Crown Audio, IQ, BCA, and Amcron are registered trademarks of Crown International. HiQnet is a 

trademark of Harman International Industries, Inc. Other trademarks are the property of their respective owners.

©2015 by Harman  International, 1718 W. Mishawaka Rd., Elkhart, Indiana 46517-9439 U.S.A. Telephone: 574-294-8000

I-Tech 4x3500HD DriveCore™ Series  

5059136 
4/15

Some models may be exported under the name Amcron.

®

Содержание I-Tech 4x3500 HD





































Отзывы: