PARTS INSTRUCTION
1.
Air Exit Grill
2.
Air Inlet Grill
3.
switch
4.
Cool shot button
5.
Handle
6.
Hanging Loop
Using the dryer
Two switches for speeds and temperatures setting
1.
The above switch control two different speeds and two different
temperature ,and 0 is for turn off the power. The below one is cool shot
button
2.
Dry your hair with towel and then use the dryer. Plug in appliance and
select the switch position for the right temperature and airflow.
3.
Once your hair is dry set the switch off “0” position and unplug the dryer.
Important
1.
Connect the dryer to 220-240 volt outlet.
2.
Never use in the bathtub,shower,or over a filled sink.
3.
Do not use cleaning solutions or abrasives for cleaning the hair dryer.
4.
Never lay it down on a humid pillow or blanket when in use.
5.
Make sure that the air inlet and air exit grills are free when using the
unit.The dryer is protected against overheating.If the air inlet is accidently
covered,the dryer will stop automatically.Switch off and allow to cool down
for a few minutes before attempting to restart.
6.
Disconnect after use.