Crown FD-40MC Скачать руководство пользователя страница 2

 

 

SAFETY PRECAUTIONS

 

When using any electrical appliance,basic safety precautions should always be 

followed,including the following: 

1. Read all instructions and keep for future reference. 

2. This appliance is not intended for use by persons(including children) with reduced 

physical,sensory or mental apabilities, or lack of experience and knowledge,unless 

they have been given supervision or instruction concerning use of the      appliance by a 

person responsible for their safety. 

3. Young children should be supervised to ensure that they do not play with the 

appliance. 

4. Always unplug the appliance from the mains when not in use . 

5. To disconnect the appliance,switch the control to OFF,then unplug from the mains. 

6. To unplug the appliance,always grasp the plug;do not pull the cord. 

7. If the supply cord is damaged it must bereplaced by the manufactuer, its service agent or a 

similarly qualified person in order to avoid a hazard. 

8. Do not use outdoors. This appliance is designed for household use only. 

9. Place the power cable away from areas where people walk so that it cannot be 

stepped on or tripped over. 

10. Always use the appliance on a flat ,stable surface. 

11.Never clean this appliance when it is plugged in .Do not immerse it in water, Clean the 

outside surface with a damp cloth or soft brush and dry with a soft dry cloth. 

12.Use the appliance only as directed in this manual. Misuse could void your warranty. 

13. Avoid contact with moving parts, Never insert any objects through the grille when the fan 

is in operation 

 

 

ASSEMBLY INSTRUCTION:

 

Base Assembly 

 

1.

 

Unscrew the Fasten Ring and    Base Locking   

Nut from the Stand Assembly.

 

2. Insert the Stand Assembly through the hole in 

  the center of the Base and twist into position. 

3. Turn the Stand Base upside down with the Stand 

Assembly facing the floor and place the Base 

  Weight Support to the bottom of the Base. 

Tighten the Base Weight Support to the Stand 

  Base by screwing back the Ring and     

Отзывы: