Crown DCi 2 1250N Скачать руководство пользователя | Manualshive

Страница: 36 / 72

background image

DriveCore Install Network Series

Power Amplifiers

Operation Manual

page 36

BLU link

Latency using BLU link in DCi-N

Path

Analog Input to Amplifier Output

Analog Input to BLU link Output

48khz BLU link to Amplifier Output

96khz BLU link to Amplifier Output

Total Latency (for selected path)

1.67ms

1.0ms

2.47ms

2.27ms

The analog inputs for the DriveCore Install Network amplifier provide additional flexibility when for the BLU link digital audio bus. From the BLU link Output Configuration

window (Input Icon >Source Routing > BLU link Output Configuration), it is possible to utilize the DCi-N amplifier to be a BLU link On-Ramp in two different ways:

Send unprocessed audio from the analog inputs of the amplifier to 1 of the 8 available BLU link outputs

NOTE: The audio from the analog inputs passes though the amplifier input gain stage (affected by selecting 28dB or 34dB of gain), and then through the input trim

and polarity switches in the Source Routing - Input Configuration panel, before being sent to the BLU link bus.

Send post-processing audio from a DCi-N amp channel to 1 of the 8 available BLU link outputs

NOTE: The post-processing audio is bussed from a point at the end of the entire channel processing chain in the DCi-N. This is effectively analogous to taking

the audio from the physical output of the amplifier feeding a loudspeaker, and routing it onto the BLU link network.

After selecting an Audio Source in the dialogue shown above, double-click on the BLU link Routing button. It is absolutely necessary to take this additional step, which

allows the 8 BLU link output slots inside DCi-N to then be routed onto one of the slots available on the larger BLU link audio ring.

NOTE - BLU link OUTPUTS (ON-RAMP FROM DCi-N TO BLU link ) ARE DISABLED WHEN THE BLU link NETWORK IS OPERATING AT 96KHZ SAMPLING RATE

When attached to a BLU link network running at 96kHz, DCi-N will not be usable as an on-ramp. The amplifier will be able to receive a full compliment of up to 8 streams to

send to the input router, but it will not be able to send any analog or post-processing audio signals back onto the BLU link network.

See the section on BLU link Settings for more information about operation at different sample rates, mastership priority, and for more help on BLU link audio.

Figure 33 BLU link Output Configuration

«
...
34
35
36
37
38
...
»

Содержание DCi 2 1250N









































































Отзывы:

Нет отзывов

Похожие инструкции для DCi 2 1250N

Бренд: JBL Страницы: 16

Бренд: Fender Страницы: 20

Бренд: Total Mobile Audio Страницы: 11

Бренд: Sansui Страницы: 24

Бренд: McIntosh Страницы: 20

Бренд: IRT Electronics Страницы: 10

Бренд: JBL Страницы: 31

MOSCONI AS LED FRAMES

Бренд: Audio System Страницы: 2

Бренд: icon Audio Страницы: 6

Бренд: Acoustic Страницы: 8

Бренд: Pyramid Страницы: 16

Бренд: Radio Shack Страницы: 4

V30 The Countess

Бренд: Victory Страницы: 8

Victoreen 943-227-15

Бренд: Fluke Страницы: 45

Бренд: Parasound Страницы: 7

Бренд: Russound Страницы: 51

Бренд: Ayre Страницы: 24

EM275 METROMIX SERIES

Бренд: Eden Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды