13
14
OPERATION AND CONTROLL
PRE OPERATION
BATTERY
Please see the chapter 6 for charging
steps.
Please check if the batteries are steady
securely in place to prevent the batteries
from vibration. To see if there is dirt
retention,foreign matter on the batteries.
Prevent acid form spilling from the
batteries. Check if the battery terminals
are loosed.
STEPS FOR STARTING THE
CART:
1.Check the E-stop switch, and make sure it
is on. It is in the lower left side of the dash-
board,pull it up to the bottom, the cart is
power. Pull it down,then the cart is off.
2.Turn on the electric lock, move the shift to
“D” or “R”(wait 2 seconds)and release the
hand brake, then step the accelerator
pedal to move it forward gently.
1.Get off the accelerator pedal,make it stop or
step the brake pedal.
2.If needs to change the switch,please pull
the switch to “D” or “R”.
3.If needs to stop,please pull the switch to
“N”,and then pull up the hand brake and
turn off the electric lock to park the cart.
TIRE CONDITION
TIRE PRESSURE
Check the tire pressure before use.
CAR STOP
HAND BRAKE
Tire wear limit
Wear limit
Please check the damage for the surface
of the tire,crack or embedded objects.
Please replace the tires if the tire wears
down to 0.04(1mm).
Tire pressure
Completely stopping car before shifting F/R switch.When shifting F/R
switch,please turn switch to middle positon for 2s at first,then choosing Forward
switch or Reverse switch.Don’t shifting F/R switch in a hurry in case that the
sensor will be burnt or switch will be out of use.
Note: Please make sure the cart is stopped
before changing the shift switch. Firstly turn to
“P” switch, and then move to “D” or “R” after
waiting 2 seconds. Be sure not to change the
switch in a hurry to avoid burning the contac-
tor or damage the switch.
Once stop the cart, pull up the hand brake to
finish parking completely.
WARNING
30-35PSI
