Crown CEM-1515 Скачать руководство пользователя страница 6

 

Note:

 Clean steam outlet with wet sponge immediately after steam stops generating, but care not to hurt! 

6. Pour the frothed milk into the espresso prepared, now the cappuccino is ready. Sweeten to taste and if 
desired, sprinkle the froth with a little cocoa powder. 

7. Press and release the

 ON/OFF button

 to the higher position which is the “

O FF

” position

 

to cut the power 

source off. 

Note:

  we  recommend  you  allow  the  maker  to  cool  down  at  least  for  5  min  before  making  coffee  again. 

Otherwise burnt odor may occurred in your Espresso coffee .

 

PRODUCING STEAM TO HEAT LIQUIDS 

The  steam  wand  (without  the  frothing  device)  can  be  used  to  make  hot  beverages  like  drinking  chocolate, 
water or tea. 
Method: 

1. Remove the detachable tank and fill it with desired water, the water level should not exceed the “MAX” 
mark in the tank. Then place the tank into the appliance properly. 

2. Then connecting the appliance to power supply source. 

3.  Press  down  the ON/OFF button  to  the lower position  which  is  the  “

” position, the power indicator 

(red) is illuminated. 

4. 

Press  down  the  pump  control  button  to  the lower position which is  the  “

” position, make sure the 

coffee/steam  button  is  on  the  higher  position  which  is  the

position, the  pump  will  pump  water,  when 

there  is  water  flowing  out,  close  the  pump  immediately,  pressing  down  the  coffee/steam  button  to  the 

lower  position  which  is  the 

  position  and  waiting  for  a  moment,  the  appliance  begins  to  be  heated 

until the green lamp is illuminated, it shows the heating is finish.   

5. Remove the frothing device from the steam wand. 

6. Dip the steam wand into the liquid to be heated. Turn the steam control knob in anti-clockwise slowly to 
start making steam. 

7.  When  the  required  temperature  is  reached,  you  can  turn  the  steam  control  knob  to  the  minimum 
position. 

8. Press and release the

 ON/OFF button

 to the higher position which is the “

O FF

” position

 

to cut the power 

source off. 

 

CLEAN AND MAINTENANCE: 

1

Cut off power source and let the coffee maker cool down completely before cleaning. 

2

Clean housing of coffee  maker with  moisture-proof sponge often and clean water tank, drip tray and 
removable shelf regularly then dry them.   

Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing in water for cleaning. 

3

Detach the metal funnel through turn it clockwise, get rid of coffee residue inside, then you can clean it 
with cleanser, but at last you must rinse with clear water. 

Содержание CEM-1515









Отзывы: