manualshive.com logo in svg

Crown ce 4000, Справочное руководство, Страница: 22 / 32

Поделиться
Скачать
Crown ce 4000 Скачать руководство пользователя страница 22

Page 43

Page 42

Reference Manual

Reference Manual

CE 4000

 

 The amp with an Attitude!

CE 4000

 

 The amp with an Attitude!

Figure 5.3
Block Diagram
for Crown’s
SST-SBSC

SST-SBSC (Summed Bass Stereo Crossover) Module

Crown’s advanced SST-SBSC module offers ten user-speci-
fied crossover frequencies, CD horn EQ and summed sub-
bass output for driving subs (see Figure 5.3 for block diagram).
The SST-SBSC offers the following features:

•

Stereo biamp.

•

12-, 18- and 24-dB (Linkwitz-Riley) / octave filters.

•

CD horn equalization.

•

Mono summing of sub-bass output for driving subs.

Crown plans to release additional accessory plug-in modules
offering a range of advanced features and capabilities. Watch
for new releases.

Fault Monitoring

The Fault (RJ11) jack, which looks like a telephone plug, is
located on the back of your CE 4000 amplifier. It gives you an
easy way to remotely monitor the amplifier’s fault status. To set
up a circuit that will cause an LED to light whenever a fault
status occurs, you can simply use the suggested circuit shown
in Figure 5.4.

When using this circuit, the LED will glow whenever the ampli-
fier is in one of four states: a channel’s heatsink has reached its
temperature limit, the transformer has reached its temperature
limit, the amplifier has just been turned on and is in its turn-on-
delay mode, or the amplifier is turned off.

Содержание ce 4000

































Отзывы:

Нет отзывов