21
2.
Electric Motor (Typical):
a.
Master ON/OFF:
This switch controls the power to the electric motor
that turns the mixing drum. Move the switch
rearward to turn ON and forward for OFF.
FOTOMOTOR
3.
Drum Position:
This lever and lock assembly sets the position of the
mixing drum.
a.
The C-3C model is equipped with a spring-loaded
pin that seats into holes in the lock disc. Relieve
the load on the pin and pull it out of the hole
when changing the angle of the drum. The C-6C
and C-9C are equipped with a spring-loaded
lever that seats into cogs on an anchor disc.
Relieve the load on the pin, lift the latch and turn
the wheel when changing the angle of the drum.
b.
Change the drum angle on the C-3C model using
lever and the wheel on the C-6C and C-9C
models.
Machine is shown
with engine Hood
open for illustrative
purposes only. Never
operate with hood
open.
Fig. 3 EXTERNAL KILL SWITCH (TYPICAL)