Crown 7640186247078, Оригинальное руководство пользователя

Страница: 23 / 180

23
English
Symbol Meaning
III Protection class�
Attention� Important�
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards�
Useful information�
Wear protective gloves�
During operation, remove
the accumulated dust�
Pendulum motion off�
Pendulum motion, first
stage�
Pendulum motion, second
stage�
Pendulum motion, third
stage�
Saw blade T-shank�
Do not dispose of the power
tool in a domestic waste
container�
Power tool designation
The cordless jigsaws are used for sawing wood, plas-
tic, aluminum and other types of materials (see guide-
lines for the use of saw blades)� The sawing trajectory
may be both straight and curved; the option of angling
the casing allows making angular cuts�
Power tool components
1 LED lamp
2 Thumbwheel for stroke rate selection
3
Lock-off button
4 On / off switch
5 Ventilation slots
6
Battery lock *
7 Indicators of the state of battery charge *
8 Control button of the state of battery charge *
9 Battery *
10 Contact protector
11 Saw holder
12 Wing screw
13
Guide roller
14 Plastic overlay *
15 Base plate
16
Lever for pendulum stroke adjustment
17 Scale
18 Junction pipe
19 Charger *
20 Saw blade *
21 Allen key *
22 Parallel guide *
23 Indicator (green) *
24
Indicator (red) *
25 Label *
26 Base plate mounting bolt
* Optional extra
Not all of the accessories illustrated or described
are included as standard delivery.
Installation and regulation of power tool
elements
Before carrying out any works on the power tool
remove the battery 9.
Do not draw up the fastening elements
too tight to avoid damaging the thread �
The inserting / replacing of the saw blade (see fig. 1)
As a result of the long use the saw
blade 20 may become quite hot and
the sharp cutting edges may injure the
user, therefore one must always use
protective gloves when inserting / replacing the
saw blade 20.
Attention: observe the following rules upon the in-
serting of the saw blade 20:
• the teeth of the saw blade
20
must face forward;
• the claws on the stem of the saw blade 20 should
rest upon the saw holder 11 ;
• the saw blade 20 must fit inside the cavity of the
guide roller 13 �
• Move and hold in this position sleeve of saw holder 11
as shown in fig. 1.1 (this will unlock the clamping mecha -
nism of the saw holder
11
and allows you to insert / re-
place the saw blade 20 )�
• Insert / replace saw blade 20 (see fig. 1.2).
• Release sleeve of saw holder 11 and it will automatically
return to its original position (see fig. 1.3). This will lock
the clamping mechanism of the saw holder 11 �