CROWN VERITY Infinite CV-IC1, Руководство пользователя

Страница: 5 / 66

Page 5 of 66
Inspecting Your Shipped Appliances
IF SHIPMENT ARRIVES DAMAGED
This product was carefully inspected and tested before leaving the factory. Upon acceptance of
the shipment, all freight damage responsibility is relinquished by the freight carrier.
VISIBLE LOSS OR DAMAGE
• Be sure any visible damage to the carton is noted on the freight bill or express receipt and
signed by the person making the delivery.
• FILE CLAIM OR DAMAGES IMMEDIATELY , regardless of extent of damage
CONCEALED LOSS OR DAMAGE
• If damaged is unnoticed until the appliance is unpacked, notify the transportation company
or carrier immediately and file a “concealed damage” claim with them. This should be done
within 5 days of the date delivery is made to you. Be sure to hold on to the packaging for
inspection. We cannot assume responsibility for damage or loss incurred in transit.
Unpacking and Assembly
The appliance arrives fully assembled and ready to use. Please follow the uncrating and
unpacking steps to avoid damage to the product.
The shipping weight on smaller units is approximately 300 lbs. and larger units may weight over
500 lbs.
WARNING: Use two or more people to move or install this unit. Failure to follow
instructions can result in personal injuries.
REMOVING THE CARTON
• Remove the staples at the bottom of the carton.
• Lift off the carton
• Cut straps holding the appliance to the pallet. The straps are installed under load, wear
protective eyewear when cutting the straps as they may spring back.
• With assistance, remove the appliance from the pallet and place into desired location.
For appliances with wheels, the appliance will not directly roll off of the pallet. An option to
safely remove the appliance off the pallet is by lifting one end of the appliance high enough to
place a ramp under the wheels and then lift the other end while rolling the appliance off the
pallet.