Louver
Timer
Humid
Cool
Power
Air
直接连接外部水源，无需加水。
C.
1.Slip the clips as Pic indicate,take off
the dust filter;
3.Pull up and take down the back pannel; 4.Take out the cooling pad and clean it;
2.Follow step B and take off the top
cover,use the key hanging in the wire
to unscrew the fixing screws;
A.Control
B.Filling Ice
1. Touch to turn ON or OFF the cooler;
2. Touch to adjust air speed;
3. Touch to turn ON or OFF the Louver Swing;
4. Touch and turn ON or OFF the cooling function.If the Low-water Indicator light on warning
the water pump stop working,please filling water in time.
5.
6. Touch to set the timing function 1-7 hours.
1.
2.
D.Drain Water
High Speed
Mid Speed
Low Speed
Low-Water Indicator
Receiver
Press the clips in top cover
and slide them up to unlock.
Slide back the top cover,then
fill the ice or ice crystal in the
box.
ice or ice crystal
Clean The Cooling Pad
(warning：Be aware to unplug the cooler before any maintainence.)
Unscrew the drain cap as Pic,lean
back the cooler body and drain
empty the water.
If the humidity of the circumstance is high,please touch and turn ON or OFF the humid
adjust function.when humidity-control ON,the pump will be in acircle of 20mins’ Pump-ON
and 20mins’Pump-OFF;
Operation
Installation method
Caster assembling
Take out the 4 casters and fix them as
Pic indicates,Make sure the 2casters-
with-lock be in the direction of front
pannel,Go to next step after the cooler
moving smoothly.