1. General
The F-Gas detector provides
enclosure.
The sturdy, IP54-protected casing
indication and the interface electronics
Based on the physical measuring principle of infrared absorption, apart from selectiveness,
this transmitter offers the best prerequisites for reliable and lasting
difficult environment.
The F-Gas detector is able to detect even the smallest quantities of toxic gases reliably and
to report its findings to a connected
transmitted as a linear analogue current or voltage
The following signals are available
(0)4 – 20mA
Linear; the desired operating mode can be set
0 - 2V
0 - 5V
0 - 10V
Linear; the desired operating mode can be set
Linear; the desired operating mode can be set via a link
10V setting requires at least
Important:
the F-Gas detector is not certified for use in a hazardous area. Any form of
maintenance, parameterization and all changes to the settings of the device must only be
carried out by trained and authorized staff.
F-Gas Detector
provides the benefits of the IR gas sensor technology
protected casing houses the IR sensor, a user interface with LED status
and the interface electronics
(fig.1)
.
Based on the physical measuring principle of infrared absorption, apart from selectiveness,
this transmitter offers the best prerequisites for reliable and lasting detection
is able to detect even the smallest quantities of toxic gases reliably and
to report its findings to a connected control system.
The gas concentration can be
linear analogue current or voltage output.
The following signals are available as analogue values:
Linear; the desired operating mode can be set
Linear; the desired operating mode can be set
Linear; the desired operating mode can be set via a link
10V setting requires at least 15V DC as supply voltage
Gas detector is not certified for use in a hazardous area. Any form of
maintenance, parameterization and all changes to the settings of the device must only be
authorized staff.
Front Casing
Rear Casing
Interface PCB
Figure 1: F-Gas Detector Layout
Gas Detector Instructions
IR gas sensor technology within a robust
user interface with LED status
Based on the physical measuring principle of infrared absorption, apart from selectiveness,
detection, even in a
is able to detect even the smallest quantities of toxic gases reliably and
concentration can be
Linear; the desired operating mode can be set via a link
Linear; the desired operating mode can be set via a link
Linear; the desired operating mode can be set via a link
15V DC as supply voltage
Gas detector is not certified for use in a hazardous area. Any form of
maintenance, parameterization and all changes to the settings of the device must only be
Interface PCB