2
Introduction
General Description
The
FW2
Siren
can
be
assigned
in
Runner2
series
or
SERENITY
control
panels.
Siren
programming
instruction
for
Runner2
and
SERENITY
either,
will
be
described
on
the
next
pages.
FW2
Siren
for
Runner2
requires
the
FW2
‐
TRANS
installed
in
the
Runner
box
which
is
connected
to
the
Runner
communication
bus
connector
on
board.
For
the
SERENITY,
the
FW2
Siren
communicates
with
RF
module
which
is
plugged
on
the
SERENITY
Board.
The
FW2
Siren
unit
can
be
powered
by
Lithium
Battery
3.6V/14Ah
or
by
external
power
supply
12V/0.8A
or
both.
FW2 Siren Introduction to RUNNER2
RUNNER 2 contains The FW2-TRANS which is an advanced product that adds support 2way
wireless devices for the "CROW-RUNNER 2" alarm systems.
FW2-TRANS include integrated RF transceiver and an interface with the runner BUS system.
The use of FW2-TRANS will enable the user to get back compatibly with FW 1 way wireless
devices together with the supreme 2way wireless line of devices that uses an advanced
2way RF transceiver combined with an intelligent communication protocol and a unique 24
bit ID number.
FW2-TRANS can be installed in selected runner system case or in an external box while
protected by the on boards tamper
NOTE: For more information on FW2-TRANS please refer to FW2-TRANS document.
Figure
1
